View Single Post
  #9   Report Post  
Old April 20th 09, 08:46 PM posted to sci.electronics.design,rec.radio.amateur.homebrew
Highland Ham[_2_] Highland Ham[_2_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Sep 2008
Posts: 21
Default If Superheterodyne, why not Subheterodyne?

Tim Shoppa wrote:
A terminology question I suppose about the derivation of the term
"Superheterodyne" more than anything else:

Does the "Super" actually mean anything? Is there a Subheterodyne?

Traditionally superhets mix a higher radio frequency down to a lower
IF frequency, but certainly in the past few decades radios with IF's
above the RF frequency have become very common in broadband
applications, and those are still called superhets, not subhets :-).

Google turns up a couple hits on subheterodyne but other than one that
might mean "IF higher in frequency than RF" I don't recognize what
they mean..

======================
Many of not most modern HF receivers have a first IF in the 45-75 MHz range.

==================================================

I suspect that "Super" was more a marketing term than anything
else :-).

Tim N3QE


frank GM0CSZ / KN6WH