In article ,
says...

I did as one poster suggested. I removed the antenna from my
receiver, tuned around while transmitting, and discovered the
following:
(Crystal is 7110 kHz)
at 3554 kHz, signal is S8
at 7110 kHz, signal is S6
at 14218 kHz, signal is S6
at 21326 kHz, signal is S7
at 28433 kHz, signal is S5

I'm probably going to rebuild this rig, without the circuit board.
Many thanks to all who gave me advice on this. Any further comments
are also much appreciated.

Build it "ugly style" on an unbroken sheet of copper-clad board, and try
a ferrite bead or two in the base and/or emitter leads of the
transistors. The FAA and your local cellular-phone company will thank
you.

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------