View Single Post
  #13   Report Post  
Old November 21st 03, 02:32 AM
w4jle
 
Posts: n/a
Default

Simply lay the wires on the ground. Take old coat hangers and cut 6" pieces
from them. Fold in half and place over the radial wire stapling it to the
ground. By next spring you will not be able to find a wire let alone trip
over it.


"Mike Coslo" wrote in message
t...
'Doc wrote:


Mike,
Yes, it's serious, many times a ground radial system
will be 'better' than a ground rod(s). Given the rocky
ground as in the original post, a radial system would be
much preferable to ground rods.
Given that you get the wires deep enough to be missed
by the lawn mower, what's so dangerous about it?
'Doc


If it is under the surface, then no problem. But I'm referring to the
laying the wires on the ground comment I've heard of a few times here.
And that would be dangerous for people crossing the lawn, and myself,
after the XYL is done with me! 8^)

- Mike KB3EIA -