View Single Post
  #22   Report Post  
Old June 21st 09, 04:08 AM posted to rec.radio.amateur.antenna
Frank[_9_] Frank[_9_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Dec 2008
Posts: 23
Default Horizontal Dipole - zero degrees elevation


"tom" wrote in message
. net...
Frank wrote:
At 10,000 meters, 3 meters off the ground:
E(theta) is maximum off the ends at 3.5E-8 V/m
E(phi) is maximum off the sides at 2.6E-7 V/m

This agrees with the expected horizontal polarization off
the sides, and vertical polarization off the ends.

Frank, VE6CB
Now what's the result without the surface wave?

Roy Lewallen, W7EL


Good point: E(theta) off the ends 1.25E-7 V/m
E(phi) off the sides 1.04E-7 V/m

Frank


Ok, how do I get those, and select those, results? I looked for it, but
couldn't find it in EZNEC.

tom
K0TAR


It comes from the "RP" card; line 8 below. I do not know how to
implement this line of code in EZNEC. I am sure there are
plenty of people In this group that know how to do it.

Frank
VE6CB

CM Horizontal Dipole
CE
GW 1 11 0 0 3 0 1.5 3 0.01
GE 1 -1 0
GN 2 0 0 0 13.0000 0.0050
FR 0 1 0 0 100 1
EX 0 1 6 0 1 0
RP 1 1 360 0000 3 0 1.00000 1.00000 10000
EN