"RFI-EMI-GUY" wrote in message
ng.com...
mike lee wrote:
Hi all I use an Dressler ARA 30 active antenna, how ever the PSU that I
used to power it 12V has gone belly up and in doing so it has melted a
resistor inside the little box that comes with the antenna.
Inside the box are 2 caps and 1 resistor, I can not get any colour code
from it due to the damage so I cant simply replace it.

Does any one know what this resistor could be please?

TIA,

Mike.

Could very well be an RF choke that happens to look like a resistor. Are
you sure the preamp itself is not fried?

--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©

I agree with Joe- the preamp may have gone west. Some power inserters do use
a series resistor- but more often a choke. The only reason for it to burn up
would be excessive current draw by the preamp- or a kinked and shorted
feedline.
Put a VOM across the preamp input and see what the input resistance looks
like. Tantalums on the input often short when exposed a surge.

Dale W4OP
Dale W4OP