On Jun 30, 1:05*pm, Pete wrote:
On Sun, 28 Jun 2009 23:49:26 -0700, Matt Murphy wrote:
All,
I have the regular frequency hopping issue common to the FT-747gx. One
time I came across someone that replaced the clicking vfo knob/ encoder
with a smooth encoder. *Does anyone know of someone that has done this?
I hate the clicking when trying to tune.

I can't remember now but I had thought they used a 757 or 767 encoder.
If I remember right (probably not) it was not a drop in replacement but
had to be hotwired. *Yaesu, of course, will not say anything more than
what the direct replacement is.

If memory serves me right, there may be some pots associated with the
optical encoder timing.

Alternatively, if the part is no longer available, allot of the old
encoders use generic opto-couplers that can be replaced. One of the three
must be out

Or, there is dirt blocking the optics

Hope this helps

The encoder issue I am having is not an unusual thing. Most 747's get
this issue. I would have thought that at least someone else had done
the replacement using another encoder. The most annoying thing about
it is it not having the smooth dial to spin.

Matt