View Single Post
  #3   Report Post  
Old July 25th 09, 10:10 PM posted to rec.radio.amateur.antenna
Slade Henson Slade Henson is offline
external usenet poster
 
First recorded activity by RadioBanter: Apr 2009
Posts: 23
Default Antenna Wire / Downlead Connector

Cool, Art; thanks. Therefore, I use an insulated wire for the the Downlead,
solder it to the horizontal antenna wire, and slip it into the red SW ANT
plug on the side of the radio. A 10 Ga wire, then, connects the black GND
plug to the ground. Thanks. That answers my question.

slade

"Art Unwin" wrote in message
...
On Jul 25, 12:48 pm, "Slade Henson" wrote:
In Joe Carr's Receiving Antenna Handbook, page 51 and 53 show a "heavy
dot"
as the connection between the Antenna Wire and the Downlead. Is the "heavy
dot" a "Center Insulator" as show on pages 29-31?

Thanks for your help.

slade


Usually when a wiring diagram is drawn the wires cross each other as
they go to different placeds
To differentiate between wires crossing and a wire connection one
usually places a dot to signify an electrical connection.
Art