"Frank Dinger" wrote in message
...

Over the years I bought cut-offs up to large sheets of double sided PCB
(at
amateur radio flea markets) , which can also be used to make front panels
and small cabinets/ enclosures.

My stock of double sided epoxy board is a 4 ft by 4 ft sheet I bought at a
hamfest for $20 or 25 IIRC. I have some smaller pieces left over from the
past.

If you don't want to solder partitions or sides, you might do as I and buy a
10-ft length of extruded aluminum angle, 0.25 inches on a side. This way you
can screw things together without worrying about overheating / delaminating
the PC board. You can also take things apart if needed :-(