View Single Post
  #10   Report Post  
Old October 19th 09, 03:39 PM posted to rec.radio.amateur.antenna,rec.radio.amateur.homebrew
Jeff Liebermann[_2_] Jeff Liebermann[_2_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2007
Posts: 1,336
Default Site for DIY 2.4Ghz impedance equipment help

On Mon, 19 Oct 2009 06:34:06 -0500, "amdx" wrote:

For the price of 1 tranceiver
http://www.youtube.com/watch?v=N0w5U0Xj1MU


So did the (plexiglas?) change the velocity factor for tuning.


The plastic raised the dielectric constant of the space between the
patch and the ground plane. In effect, it increased the effective
wavelength of the patch slightly, thus lowering its tuned frequency.
You can (accidentally) get the same effect by tuning the antenna, and
then placing it inside a PVC radome, which will also slower its tuning
frequency. The author will probably find himself re-tuning the
plastic piece after he's installed the patch antenna in an enclosure.

Ya, I'll take his test equipment.
Mike


Build your own test equipment first. When that fails, mortgage the
house, wife, kids, car, dog, cat, toys, etc and buy something better.
However, beware of test equipment envy. Once you get on the test
equipment upgrade path, nothing you own will be good enough, and there
always will be something better.

--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558