Help needed with Halli SX 100 repair
On Nov 12, 6:41*am, "COLIN LAMB" wrote:
I have had "static crashes" due to dry electrolytics. *If you have a scope,
you might watching the dc lines to see if you can observe any of the
"crashes" there. *I would also replace all of the paper caps.
It could be a number of things, such as a poor ground caused by oxidation or
even a noisy resistor. *A scope should be able to help you isolate the
general area.
Note that if it is a bad electrolytic, often paralleling a good one will not
eliminate the crashes. *The bad one needs to be removed from the circuit.
|