"Jason Hsu" wrote in message
m...
It's part of a design for a T/R sense circuit for a noise cancellation
device.

I won't bore you with too many details. One thing I noticed in a
design I'm looking at is that 1W resistors could be subject to as much
as 50W of power apiece during the time it takes for a relay to
respond. This response time is 7msec. The overall duty cycle will be
low (well under 1%).

Can the 1W-51 ohm resistors handle this 50 RF volts 0-peak (about 50W
PEP) for .007 sec? 50W over .007 seconds is .35 Joules. .35W for 1
second is also .35 Joules, which a 1W resistor should have no trouble
handling. Can the resistors be damaged during that .007 seconds?

Also, how much time does it take to damage a toroid? If it can handle
X units of flux density continuously, how much flux density can it
handle for .007 seconds with a low overall duty cycle (like well under
1%)?

Jason Hsu, AG4DG
usenet AAAAATTTTT jasonhsu.com

Kamaya Ohm Resistors. I love those guys. Check it out, 1W SMD 500W @ 7ms.

http://www.kamaya.co.jp/us/image/catalog-46.pdf

enjoy
harry