February 1st 10, 11:40 PM
|
Junior Member
|
|
First recorded activity by RadioBanter: Jan 2010
Location: New Zealand
Posts: 10
|
|
Quote:
Originally Posted by dbird
triode wrote:
Having suffered for years with tiring audio on my R71, decided to fix
it. These are one of the best radios ever made, worth hanging on to.
Hello Triode:
With your permission, I would like to post your solution and schematic
from Mods.DK on the R71 yahoo group. OK?
Thanks,
Dave
The problem is the switching diode D75. The Emitter follower Q26 is
enabled for AM reception, the 3 volts or so being used to forward bias
D75, thereby passing the audio to IC6a. The current through the diode
being only a few hundred microamps is insufficient to turn it on fully,
causing the forward dynamic `resistance to be modulated with the audio,
causing distortion. The fix is simple. Replace R202, (100k) to 15k,
and replace R128 (1K) with a jumper. This increases the current to a
more satisfactory.3 mA or so. The results are great.
|
Hello Dave. Yes, thats fine. Have added a bit more info for you too.
|