Lostgallifreyan wrote:
Jeff wrote in :

Any receiving equipment you get will almost certainly have a 50 ohm
(nominal!) input, so any higher antenna impedances will need to be
matched back to 50ohms anyway. How much loss you will encounter by using
75ohm cable will depend on the actual set up.


Apparently no-one knows the impedance of a Sangean ATS-909 radio, I've asked
several people, at least one of whom specialises in modifying that radio.
Looks like 1K is best guess based on schematic. Loss won't bother me so much
as SNR. Several people advised that a 15 foot vertical whip is likely to
overload the input so loss is not my main concern.

It seems very strange that you are taking things to the ultimate when
considering coax cable, whilst considering using a very inferior
portable radio for your reception!!

Jeff