View Single Post
  #1   Report Post  
Old February 14th 10, 03:41 PM posted to rec.radio.amateur.equipment
Boris Tušan Boris Tušan is offline
external usenet poster
 
First recorded activity by RadioBanter: Aug 2009
Posts: 13
Default Problems with Kenwood TS-2000

Quote:

Problem Noise, static crashes in rx, all bands.
L72-0984-05 Filter TS2000
DAP202U Dual Diode
MA2S111 Diode TH79
Labor Located and replaced FL1 on Tx/rx unit which had shorted on the
input and was
pulling down the switching diodes for the filters causing noise. Also
the rx was
down about 20db in addition to the noise. Upgraded the firmware and
checked the
rx and tx on all bands. Set frequency.

http://www.youtube.com/watch?v=6EjoGKqdL8A


Yesterday I tested my TS after my friend repaired it, works just fine!
He changed faulty filter, diodes were fine.

--
Keep 'em Rolling! http://www.mvpa.org/
MVPA: 29718

http://s186.photobucket.com/albums/x51/btudan/

73 de 9A6KTB - Boris