Barett wrote:
Nice info how to use the AA-200. Thanks
I read on the internet while reading through all the links that I should
make sure when ordering the 2631803802 #31 that they have been coated with a
hardener. Because a ferrite ring #31 that has not been treated with hardener
will break easily because the material will be too brittle.
I have been in touch with http://gb.mouser.com and http://uk.farnell.com
and they both say that there Fair-rite ring 2631803802 #31 does not come
treated with any hardener.
How important is it that they should be treated with hardener and if not
treated how easy are they to break?
Don't worry about it. All ferrites are hard, brittle ceramics, but quite
rugged and not easily broken. They're already harder than most steels,
so I don't really believe they're ever coated with a "hardener". I've
seen them coated with an epoxy type material, but assume that's to make
them less porous and abrasive. It doesn't make them any easier to break.
Roy Lewallen, W7EL