"Bob" wrote in message
...
Hello,

Senior citizen that enjos HF and vhf/uhf listening, but frankly not very
technical.

A few years back, I had to order some bnc, etc. connectors.
Ordered from supposedly popular source who said they had it all in
stock, and had to wait weeks and weeks to get it as they obviously didn't.
Would sure like to avoid that kind of experience again.

Do listening only.

So, please let me ask you folks:

for sma and bnc connectors, as well as preassembled (bnc or sma on the
ends)short (3 ft or so) coax assemblies, who do you recommend as being
reasonably priced (I'll use reasonably rather than cheap) and usually
having in stock ?

For short lengths of coax, and listening only up thru the scanner freq's,
what coax should I go for that would be inexpensive ?
RG 8x, RG 59, or...?) What to stay away from ?

Again, I need something "usable" up to about 1.5 GHZ or so,
listening only.

Thanks,
Bob

For short lengths just about any coax. The RG-6 is very good if you have a
way of crimping it to the connectors and do not move it very much. The
shield is usually aluminum or some material that will not take solder. Goo
d thing about that is you can pixk it up almost anywhere wire and cable is
sold.

Up to about 50 mhz any coax about 1/4 inch ( rg 58 /rg 59 size) or larger
is fine. As you go above 100 mhz, the larger the size the beter. It just
depends on how large you want to go and how much you want to spend.