Advice from SX-115 owners
In my SX-115, putting the selectivity switch to the widest position (5KHz):
- I see a two S-units drop in the S-meter reading
- selectivity is actually narrower than in the 3 kHz position.
I wonder whether SX-115 owners have same or similar experience.
Looking at the schematic diagram, there are five switch wafers that determine
selectivity, two of which switch capacitors and three switch resistors. I have
determined that the switch works fine, so I am wondering whether the problem
could be due to a mistuning of the 50 kHz IF coils.
Thanks for any advice.
73
Tony I0JX
Rome, Italy
|