Cushcraft MA5B Noise floor?
"Owen Duffy" wrote in message
...
"David" wrote in news:Wpitn.580013$DL1.346763
@newsfe25.ams2:
The one that I have used is the acetic acid cured silicone.
Then it is corrosive on aluminium. The galvanic currents created may be
causing or contributing to your noise problem.
I would be removing the stuff, difficult as it is to do, but if it is in
contact with metal, it is not suited to your application.
Owen
Ok Owen. I will remove it as soon as I get the time to bring it back down to
ground level.
Thanks
|