On Apr 8, 8:18*pm, JIMMIE wrote:
I came by the bottom half of an Isopole 2M antenna. I am missing the
matching network and upper portion of the antenna. I am looking for
information on purchasing or fabricating these parts. I have a home
made 5/8 antenna that consist of a SS whip mounted on a Lucite rod
that also serves as a form for the matching coil. Would this work? I
have my doubts as it would considerably longer than the original.

Jimmie

Should work if you can find a way to mount it. The original upper
5/8 whip was 50 inches, same as the lower 5/8 section, not counting
the lower decoupling cone.
http://www.repeater-builder.com/aea/aea-index.html