W3JDR wrote:
Donovan,
Out of curiosity, what IF frequency are you planning to use that required
a 10.7 MHz crystal?
Joe
W3JDR
"VA7LNX" wrote in message
news:KGdDb.710704$pl3.357358@pd7tw3no...
Does anyone know how common 10.7MHz oscillator crystals are and where I
can
get them, preferable in Canada.
The reason, I've decided to build a 21MHz xcvr and the 10.7MHz crystal,
when
multiplied by 2 is at 21.4MHz which is at the top end of that band. The
10.7MHz crystal will be running the LO (obviously).
TIA
--
Donovan Hill
VA7LNX (Basic, Advanced)
actually, I've changed my design. I'm going to go with a direct conversion
reciever instead of building a heterodyne reciever this time around. It's a
lot simpler and smaller to build and will be a good refresher for 2-way.
(It's been about 4 years since I touched a radio.)
--
Donovan Hill
VA7LNX (Basic, Advanced)
|