Icom 706mkIIG Problem
Kevin W0KLH wrote:
I just reinstalled my Icom back into my vehicle after it being out for
several months, I was listening to 20 meters yesterday and tried to
get into a few of the pileups that were going on. A second or two in
keying up to ID my call, the radio shuts off. I also have developed
what sounds like a ground hum on VHF.
For an antenna I am using a Yaesu ATAS-100 with a AM-COM controller.
When tuning the antenna in, I get to very low SWR's on the meter, so I
don't think that it is a high SWR that is causing it. I have checked
all connections and they are tight, so any thing further I can check?
Thanks
Kevin
w0klh
High current DC connections can get oxide inside without loosening.
Disassemble, clean with gentle abrasives and alcohol, reassemble, coat
with petroleum jelly. You are connected directly to the battery, right?
|