On Jun 13, 12:16*pm, "Brian Gregory [UK]" wrote:
"Krypsis" wrote in message
u...
On 13/06/2010 10:26 PM, Brian Gregory [UK] wrote:
*wrote in message
...
Never heard of such a thing. I use insulators at each end, and in the
old days I used a neon bulb or a 12V tail light bulb as a bleed off. I
went to gas discharge tube arrestors a long time ago. The 12V bulb made
a really nice light show on winter days when the wind was really going.
What kind of buld exactly is a "12V tail light bulb"?
An automotive 12 volt, 5 watt bulb (globe) with (usually) a bayonet
fitting. You can get bulbs that have dual filaments, one filament for tail
lights, the other for brake or indicator lights. The brake/indicator light
filament has a higher wattage rating (21 - 25 Watts) so the bayonet
typically has staggered locating pins. This prevents the higher wattage
rating being used as the tail light filament.
http://www.eziautoparts.com.au/light...l-and-indicato...
New technology is seeing the incandescent bulbs being superseded by LED
arrays.
Krypsis
But that would most definitely not light from the static electricity induced
in an antenna wire on a stormy night and would shunt away much of the wanted
signal anyway.
So I think BDK must mean something else.
Either that or he's making it up as he goes.
Isn't that what most of us do with antennas? ;-)