View Single Post
  #17   Report Post  
Old July 8th 10, 10:00 PM posted to rec.radio.shortwave
Brenda Ann[_2_] Brenda Ann[_2_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Aug 2009
Posts: 344
Default K K V V 1060 kHz [43 Watts] "The Power Hour" 01:45 AM PDT


"VegasNightOwl" wrote in message
...

"dave" wrote in message
. ..
RHF wrote:
On Jul 7, 7:30 am, wrote:
VegasNightOwl wrote:
Type, or paste, the transmitter location co-ordinates, 36.15611°N
115.25667°W and it's funny to see an AM tower taking up an entire city
block.

- Here's the 'hood 16 years ago. The more recent scarring indicates
they
- need better performance from the ground and have buried some
"screen".
-
-
http://msrmaps.com/map.aspx?t=1&s=10...762&lat=36.156...

With a Nighttime Power of just 43 Watts :
They need all the help from the ground that
they can get. ~ RHF
.


43 Watts is plenty if the frequency's clear.





There was a station back in Pennsylvania, WESA, that used to be daytime
only. Then they were granted permission for night time transmissions.
Their night time power was 10 watts down from their 250 daytime power.
Not sure how it ever faired but it was interesting to even think if
anybody copied them outside of 200 miles or so.


VegasNightOwl


When the new (at the time) station in Milwaukie (suburb of Portland, OR)
came on the air on 1010 KHz a couple decades or so ago, it had a daytime
power of 10KW, and a nighttime power of 10W. I couldn't figure out why they
bothered. They may have been heard within a few blocks of the tower site
(omni stick), but further than that they would have been destroyed by
splatter from KOMO 1000 in Seattle, which puts in a 'local' level signal at
night.