I have a number of items from a 2-way shop that closed and I would like to
see what their market value is:
B&K 100 Model 1500 - 100 MHz Scope - Quad trace - 4 channel
B&K Model 1801 Frequency Counter
B&K Model 820 Capacitance Meter
B&K Model 2009 MTS TV-Stereo Generator
B&K Model 283 Digital Multimeter
B&K Model 177 VTVM
Manuals and other paperwork on most of the B&K gear. All seems to work...
Avcomm Spectrum Analyzer - Model PSA-37D - With manual
HELECTRONIX Model L-15 - Function Generator - with manual
(3) TrippLite 200W Square Wave Inverters (12VDC to 120 VAC)
(2) Hughes Network Systems Direct PC USB Receivers with Power Supplies MCN:
3002599-001
Astatic Model 877HL Desk Mic
Relm Desk Mic - NIB
Johnson Hand Mic - Coiled Cord - 4 pin Molex
(3) New Mic Coiled Cables
Telco Handset with PTT Bar - Looks New
Henry Radio Model C130A02 VHF Brick - 1-5W Drive for Max 130W out - Tuned
Freq 158.64
Has external Control Jack (1/4") untested
Trielectric A2080H Brick Input power - 25W or less - Has external Keying
Jack (1/8") untested
Mirage B3016 VHF Brick (for 2 Meters) (untested)
Motorola Radius P-100 with Charging Stand and Battery (10V NiCad - Bad)
Model: H430PU7120BN Ser: 759FQJ9995 Freq Range: 150.8 to 162.0 MHz
Has Keypad Installed - Battery: NTN5451B Sticker inside Case: NLD1502C1
Battery Charger: NTN4881B (With Wall Wart) - Battery will not hold charge
Motorola Radius GP 300 2 Channel HT with Battery and Antenna
Model: P93YPC20A2AA 8/30/92 Ser: 174FSQA016 DOC/MDC 1091939931 Type: YPHA
7.5 DC
Battery: HNN9628A 245MK 7.5V NiCad No Charger
Motorola Desk Mic
Motorola NMN6Q40A Hand Mic for HT
(4) Relm Mini-Com Plus Model: SLV40 (VHF 6 channel Mobile Transceiver, 40W,
150.8 - 174.02 MHz)
(3) Mics, (4) brackets, (4) Power Cords, (2) Speakers, (21) Manuals.
2 of these are in box with accys and manual. Look like they were possibly
reconditioned outs. Accept programming and seem to work OK
(1) Relm Mini-Comm SMV4099 (VHF 99 Channel Mobile Transceiver, 40W, 150.8 -
174 MHz) No Bracket, No Mic, No Power Cord, No Manual.
(1) Relm Mini-Com Pus Model: SLU25 (UHF 6 channel Mobile Transceiver, 25W,
450 - 482 MHz) No Mic, Bracket or Speaker. With Manual.
(2) Relm RFH252NB 2 Channel Transceiver - (2) Mics, (2) Brackets, (2) Power
Cords, (2) Manuals
(1) Relm RH-256NA 16 Channel Transceiver (Keypad/Display) No Mic, (1)
Brackets (1) Pwr Cord, (1) manual
(2) Relm BC45 Desk Battery Charger (1 in box, other loose - untested)
Relm PM45A Programmer
Relm PM100 Programmer
Regency Programmer
(5) Manuals for Relm PM4500 Programmer
1 - Mini-Com Plus - SLT & PT Series
2 - LMV2458 Transceiver
3 - Relm Plus - RM Series
4 - Mini-Com Plus - SM Series
5 - RSP400, RSP500, & RSP5000B Transceivers
Various Programming cables (Telco to HT Spk/Mic-Power Block [1], Telco to
telco 4 and 6 pin cables, 5 Pin twist lock mic connector to telco 6 pin flat
cable and telco connector)
Relm WHS150 VHF HT (16 channel Programmable with DTMF Keypad) With
Programming Manual
(Missing Squelch Knob - Works - Charged externally and programmed and
tested)
With Battery, Belt Clip and antenna - BP-007 NiCad Battery - 10.8V @ 700 MAH
148 to 162 MHz
(2) New BP007 10.8V - 700MAH NiCad
(9) Relm PTV56 - VHF HT - 5W- 6 Channel - (1) Has Bad Speaker
(13) Relm PTU46B - UHF HT - 4W - 6 Channel - (1) Has Bad Speaker
(1) Battery Charger - Model BCS with Wall Wart
(18) Used Batteries *
(6) New Batteries (unopened) *
* Batteries: BP-700 7/2V 700MAH NiCad
Extra Belt Clips and Antennas - HTs have been programmed and tested for
transmit and receive; no range test, power output tests or battery life
tests made. I am still charging the batteries, and so far - all have held a
charge. With only one charger (14 hour charge cycle), it is a slow process
There are some Relm service parts, and GE Service parts that I am making a
listing of. The Relm parts have 2 Keypad membranes for the Regency 256
series mobiles, displays for the RMV4099 and various small parts. The GE
parts are in individual white envelops with GE logo and are land mobile
service parts. I have been trying to test each item as well as possible,
and can give a better rundown individually via email.
If anyone is interested in purchase, please contact
via email. Discussion on market value/worth of individual items can be
discussed/ridiculed in newsgroup; or sent to above email address.
Thanks