"Antonio Vernucci" wrote in message
...
Would an SX-24 owner be so kind to scan the SX-24
schematic diagram and send it to me via e-mail?
)
The diagram on BAMA is unreadable thanks to that damn djvu
compression.
Other diagrams which can be found on the web are too faint
to be read.
Thanks i advance & 73.
Tony I0JX
Rome, Italy
There is a good readable schematic and alignment
instructions from Riders at:
http://www.nostalgiaair.org/Resources/914/M0008914.htm
There is another handbook at:
http://jptronics.org/radios/Hallicrafters/manuals.html
but its very low res and grayed out. It may be the same
one as on BAMA.
BTW, the owner of BAMA no longer accepts Dejavu stuff
because of the poor quality. It _can_ be better but most
users seem to want the smallest possible files and that
always makes things awful.
--
Richard Knoppow
Los Angeles
WB6KBL