On Sat, 17 Jan 2004 03:29:09 GMT, Harry Williams hath writ:
I am working on a project and need to label a chassis. I have used Microsoft
Visio to create a template for the front
and rear of the chassis. I then printed those images on transparent labels.
They look nice but I have two problems.
First if the ink gets damp at all it smears and second its difficult to
apply the label to the chassis without air pockets forming.

I've had success with air pockets by using a thin sewing needle
to prick the center of the air pocket and then press the material
against the background from the outer edges of the air pocket in --
towards the prick.

The smearing problem _might_ be solved by apply a second layer of
film over the first. Probably more pin pricking there, too....

HTH
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | OS/2
| Gunnison, Colorado | @ | Jonesy | linux __
| 7,703' -- 2,345m | config.com | DM68mn SK