View Single Post
  #148   Report Post  
Old October 23rd 10, 03:55 PM posted to rec.radio.amateur.antenna
K1TTT K1TTT is offline
external usenet poster
 
First recorded activity by RadioBanter: Apr 2010
Posts: 484
Default Antenna materials

On Oct 23, 7:20*am, "Szczepan Bialek" wrote:
Uzytkownik "Richard Clark" napisal w wiadomoscinews:t4i3c615njonb5i3fv0i480n0rrovhms20@ 4ax.com...

On Fri, 22 Oct 2010 10:14:25 +0200, "Szczepan Bialek"
wrote:


Power from radio waves


State and party ownership of print, television and radio media served
as an important manner in which to control information and society in
light of Eastern Bloc leaderships viewing even marginal groups of
opposition intellectuals as a potential threat to the bases underlying
Communist power therein.


It quite appears that there remains the Old Guard initiative of
oppressing intellectuals to dissiminate the party line in the form of
corrupt and revisionist technical tracts.


I *prefer Wiki:
"The voltmeter in the same radio reads 125 millivolts. Since watts (the
measure of how much power we have) is the voltage multiplied by the amperes,
we have 0.000175 times 0.125, or 0.0000218 watts, or about 22 microwatts.
The station is putting out 50 killowatts, and we are receiving one ten
billionth of that power, yet we can hear it across the room."

Could you help? *The simplest radio:
" Tape the other diode wire to a cold water faucet. This makes a good
connection to the ground, and is thus called a 'ground' connection.

* * * * Hold the remaining free bare wire of the earphone in your hand. This
makes your body into the antenna for the radio. Put the earphone in your
ear. If you are close to a strong AM radio station, you will be able to hear
that station faintly in the earphone. You may hear more than one station at
once. "

The diode has the two ends. Which one should be tapped to a cold water
faucet?
S*


well, of course, once you put a diode in the circuit you are forcing
flow in only one direction. but try this, turn the diode around so it
only allows electron flow FROM the ground... and you will still hear
the station. so now how do electrons flowing from the remote antenna
through the air get to ground through your diode??