Owen Duffy wrote:
Alejandro Lieber wrote
in :

Thank you very much for the explanation.

Another interesting and very practical graph would be: for a 20 turn,
50mm diameter and various winding pitches coil, how much additional
energy loss, 1, 5, 10, 20, 30, 40 additional short circuited turns
add.

Hello Alejandro,

I think the graphs in the article demonstrate that there is a simple
analytical solution, giving the appropriate parameters.

There are issues about the applicability of the model to the real world,
but the model does show trends about what is desirable and undesirable
practice. Wheeler's formula for inductance has its shortcomings
(Wheeler's formula doesn't take into account wire diameter for instance),
but it is (IMHO) sufficiently accurate to expose some of the
'interesting' effects that prompted your initial question.


I think that for the purposes of looking at the effect of shorting/not
shorting turns, Wheeler is more than adequate. the key is the fact that
it encapsulates the difference between the Nturns^2 (zero length
solenoid with all turns coincident, fully coupled) and Nturns (zero
coupling) for dimensions that are "practical" for ham use.

And the other interesting thing is that the graph of inductance vs
length for coils of interest here is that it looks pretty linear (and
the fact that the coil stock vendors refer to "uh/inch" kind of confirms
that)