On Wed, 21 Jan 2004 23:01:10 +0000 (UTC), Joe McElvenney
wrote:

Hi,


Having surfed for a datasheet for a Mitsubishi PA unit named M57741,
all I found was "pay-only" info.

If someone know where to find it, I would like to hear :-)


OM LA8AK seems to know a thing or two about how to use the M57741,
so you could try this page of his site.

http://home.online.no/~la8ak/d25.htm


73 de Joe, G3LLV


no, not really, I suffered the same information problems, but - you
know - most such devices are almost equal, so if you have an old
Motorola, RCA or Philips data book and look at the connections in an
application you can extract a lot of info and don't need to have exact
info. Often the gain is higher, so when the manufacturer says it needs
100mV it may sometimes work perfectly well on 10mW, and when they say
that Vc1 and Vc2 should be 12V, you may even key Vc1 or put a
potmeter in series to adjust the output, but electrolytics on the
supply voltages seem important to avoid spurious

73 JM
http://home.online.no/~la8ak/c.htm
--
Amount of SPAM is so large that MailWasher must delete 99% of the incoming mails
Cannot check every email manually. Please use intelligent title for email.
Mails without titles or using just "hi" is deleted