On Jan 31, 11:23*pm, joe wrote:
K1TTT wrote:

as long as it is ONLY 2 ports, has ONLY passive linear components, AND
is small enough to be considered a lumped element, then you can always
reverse the terminals and not know the difference. *The most
frequently violated condition is the last one, put in a piece of coax
with that is long enough to be measured at the highest frequency you
will use and all bets are off.

An electrolytic capacitor acts differently if reverse biased. The results
are usually bad. It does qualify as two leaded, passive and linear when used
properly.

an electrolytic that acts that way is not a linear component.