On Feb 2, 3:42*am, "Antonio Vernucci" wrote:
Tom,

the story began when, a few days ago, I was going to replace a trap of my HF
yagi. Not to make mistakes, I consulted the antenna assembly manual where I
found a big banner: do not invert traps otherwise the antenna will not work.

So, I thought, this is a case in which a bipole cannot be inverted.

This is clearly due to the fact that the external body of the trap (an aluminuim
can about 2 feet long), which contains two coils resonated at different
frequencies by means of built-in capacitors, is effectively part of the antenna
radiating element. So, the trap is a bipole not only comprising lumped elements,
and that is the reason why it cannot be inverted.

So, as K1TTT has pointed out, a bipole can be inverted without consequences only
if it has only 2 ports, has only passive linear components, and is small enough
to be considered a lumped element.

73

Tony I0JX
Rome, Italy

A bipole is symmetrical, obviously the internal circuity of the trap
is not symmetrical .

Jimmie