View Single Post
  #8   Report Post  
Old May 10th 11, 07:42 PM posted to rec.radio.amateur.antenna
Tom Rutherford Tom Rutherford is offline
external usenet poster
 
First recorded activity by RadioBanter: May 2011
Posts: 10
Default Horizontal Loop for 2m SSB


"Jim Lux" wrote in message
...
On 5/8/2011 10:22 AM, Tom Rutherford wrote:
wrote in message
...
http://search.yahoo.com/search;_ylt=...20meter%20halo

Myself I'd probably stick a small 3 el yagi on that
lamp mast if you had room..
Good bit more punch for SSB, and being things are
reciprocal, it will improve reception. If you squeeze
an extra 6 db from the antenna system, that's like
taking 50 watts and turning it to 200.
Best deal on an "amp" you will find..
I'm not sure the gain using a halo, but I suspect
it's probably pretty close to a dipole. Maybe a tad
more, but it's not going to be a drastic difference.
A loop has some gain broadside vs a dipole, but I'm
not sure what you get running one on it's side.


Thanks much. I'll have a look at that link and see what's what. The
Yagi
would be nice, but running out on the balcony and moving it around all
the
time isn't practical. That's why I wanted something fairly
omnidirectional,
as much of "omni" as I can get, anyway. Since I remember what my
communications instructor told us about loops (they radiate equally
poorly
in all directionsg), I figured this would be the most practical
solution
for what I want to do.



A horizontal dipole in front of a screen or single reflector would have a
"pattern" that is 100+ degrees wide.


How far behind the driven element should the reflector be? A quarter
wavelength?

Stack a couple vertically, say a meter apart, and you squeeze the vertical
beam width significantly, which is probably what you want.


Hmmm...! :-) That might be interesting, too. Feed them 90º out of phase?

What you *might* want to do is look for a low gain TV antenna for the
upper VHF bands (e.g. Channel 7-13): one of those two bay things with a
bowtie in front of a screen.


Think I'd need some kind of a balun to get the impedences to match?

--
-- 73 DE Tom Rutherford, N8EUJ, Burton, MI
"She said it was either her or the ham radio. Over."