160m Stealth
2 items
1] I have since found that Hustler did not make a 160m coil, but
Pro-Am/Valor makes this item (VAL PHF160 = VALOR 160M 8' 3/8-24 WHP/PHF
160B) that I might be able to substitute in its stead.
2] I live in a Antenna Restricted Retirement Community (NO I CAN'T MOVE),
and I have a 40ft pine tree in my back yard. I thought that I might try the
above mentioned item in conjunction with lets say a "LDG AT-200 Pro"
auto-tuner or equivalent. (Note - I cannot run any wires from the house to
the tree in the air - they have to be buried. Also I do not have any
fencing and my rain gutters are grounded.)
My idea is to strap either a metal or pvc painted pole near the top of the
tree, with a mount bracket for the whip (of course all painted to look like
the tree). I will have to feed it with RG-8x (painted) run down the tree and
buried in a trench to the house.
As far as radials go - They are out of the question. Instead - what do you
think if I should just roll up say 250ft of 13ga or so of single conductor
wire about a foot in diameter, attached at the base of the mounting bracket
(hung in the tree) and use it as a counterpoise? I might be able to hang in
the lower branches of the tree - a waterproof box with a loading coil and
attach the counterpoise there instead?
If I could tune TX/RX with this configuration, then I could possibly use it
to cover all of the HF bands.
Of course, I would like to work DX, but if not possible, then at least
conus.
Comments and suggestions welcomed.
73's Howard, W3CQH
|