On Sat, 1 May 2004 15:30:18 -0400, "Ralph Mowery"
wrote:

The generators are more of a voltage source. They will deliver their rated
output when loaded to the proper impedance. Load it with 50 ohms and see if
it gives the rated output. If not try 70 ohms, or another value. One of
the reasons for using a 6 db pad is that it helps isolate the impedance of
the generator and receiver.

My main sig gen states "output EMF using 6dB pad" next to the socket.
WTF is a "6dB pad"?
--

The BBC: licenced at public expense to spread lies.