View Single Post
  #2   Report Post  
Old March 12th 12, 03:59 PM
n5xes n5xes is offline
Junior Member
 
First recorded activity by RadioBanter: Apr 2011
Location: Springfield, La.
Posts: 2
Thumbs down

Mine started doing the same thing about 2 weeks ago. i have cleaned all of the contacts and ribbon cables that had even the slightest appearence o tarnish/grunge. Tore the power connector apart and cleaned and resized the pins, even jumpered/bypassed them but still no good.

Sometimes it will power up, other times it just sits there and clicks the power enabling relay. It even clicks with the control head removed sometimes. when it it does power up it will stay on from a second to a minute or two. sometimes just moving the radio will allow it to power up.

This is not a power source problem as it doe it on various power sources.

It acts like maybe a shorted resistor/capacitor or regulator chip, heating up and shutting down.

The ic-7000 has a similar fault and is repairable by replacing a 4.7 ohm resistor and a capacitor!! I don't know if a similar circuit is in the mk2g or not.

Anyone else come up with a fix yet???