Your experience with function generators
"Scott Dorsey" ha scritto nel messaggio
...
Antonio I0JX wrote:
The frequency stability of my HP3312A function generator is poor, very
annoying for any practical use. I am trying to determine whether that
behavior is fairly normal for function generators, or my particular unit
has
got a problem.
What is your experience on function generators frequency stability?
Most of them aren't terribly long-term stable, because they aren't designed
for that. But with the HP, there will be a specification for drift in the
back of the manual.
If you give it a half-hour warm-up, how much does it drift in the next
half-hour?
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Unfortunately the HP manual does not tell the frequency stability. No useful
information found searching the web.
Frequency measurement results:
- Just turned on. Frequency = 5.000 MHz Delta F = 0
- 15 minutes after. Delta F = -98 kHz
- 30 minutes after. Delta F = - 116 kHz
- 45 minutes after. Delta F = -132 kHz
- 60 minutes after. Delta F = -141 kHz
- 75 minutes after. Delta F = -147 kHz
Again the question is: is my generator faulty or all instruments based on
the same (analog) frequency generation principle (charging a capacitor at
constant current) behave more or less the same?
73
Tony I0JX
|