View Single Post
  #75   Report Post  
Old July 6th 12, 07:30 PM posted to rec.radio.amateur.antenna
[email protected] jimp@specsol.spam.sux.com is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
Default Dipole-2 different wire sizes?

Szczepan Bialek wrote:

"Rob" napisa? w wiadomo?ci
...
Szczepan Bialek wrote:


Do you mean the antenna with the two legs where the one leg is
connected
to
the shield of a coax?

That is not a correct way to feed a dipole!
There must be a balun between the coax and the dipole.

The balun only improve the monopole . The only one leg is red (radiate):
http://en.wikipedia.org/wiki/File:Di...ebandbalun.png


The color someone used in an illustrative diagram has no significance
in the operation of the antenna.

Both the halves of the dipole are involved in the radiation.


If it is feed by the two wires transmission line:
http://www.deltadx.net/ABCDx/Sections/Antennas.htm
http://www.deltadx.net/ABCDx/Section...le-Ladder2.gif
S*


Not "if", moron, always.

READ your own link.

If a dipole is fed with coax AND if there is NO balun device, then common
mode current flows on the outside of the coax and the coax ALSO radiates.

If a dipole is fed with coax AND if there IS a balun device, then there
is no feedline radiation.

In either case, the dipole radiates from both halves.

That is what your link says happens but you are too stupid to read it and
can only look at the pictures and misinterpret what they mean.