Thread
:
common mode current
View Single Post
#
9
July 11th 12, 05:03 PM posted to rec.radio.amateur.antenna
Rob[_8_]
external usenet poster
First recorded activity by RadioBanter: Dec 2008
Posts: 375
common mode current
Szczepan Bialek wrote:
"Rob" napisa³ w wiadomo¶ci
...
wrote:
Boomer wrote:
I looked at my antenna the other day while I was talking. I saw some
jumping off. Szczepan has been right all along. Or maybe it was bird do
do I saw falling. Anyway, something was coming down from my antenna.
Me too but I know what it is; the insulation from the cheap Home Depot
house
wire I used to make the antenna.
The damn insulation is hard to strip off when it is new but falls off all
by itself after a couple of years in the sun.
Maybe the insulation is falling off because of all the electrons that
have tried to jump off the wire when you were transmitting, and became
trapped inside the insulation?
Your antennas are the diwire.
From the radiating wire the electrons jump off and penetrate into the
counterpoise wire.
It would be interesting to know if is any difference in behavior of the
different wires.
From experience we all know that there is no difference between te
behaviour of insulated or blank wires when used as an antenna. We use
what is convenient.
This sort of contradicts your claim that electrons jump off the wire,
as this would not work as well with an insulated wire as with a blank
wire.
Reply With Quote
Rob[_8_]
View Public Profile
Find all posts by Rob[_8_]