On Thu, 12 Jul 2012 09:36:52 +0200, "Szczepan Bialek"
wrote:

It is obvious that you was working in R&D places.

Wrong. I worked for several manufacturers as an employee and as a
consultant. There was no R&D and I have never done any R&D.

If a prototype is a succes then the formal documentation is made by another
staff.

I never produced any formal documentation at any company. I did what
was needed to get a product into production and occasionally to
scribble something for trade journals and advertising.

The prototype and documentation were a parallel effort in order to
save time. It was quite common to do the prototype in stages, with
sections of the design being frozen before the final product had been
tested. This allowed some of the documentation to be completed before
the prototype was completed.

The closest approximation of something formal were two radio direction
finders for the US Coast Guard. The documentation was done by a
professional tech manual writer. I wrote most of the raw text and
sketched some of the drawings.
http://802.11junk.com/jeffl/AN-SRD-21/
http://802.11junk.com/jeffl/AN-SRD-22/


--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558