-----Messaggio originale-----
From: Scott Dorsey
Sent: Wednesday, August 01, 2012 10:28 PM Newsgroups:
rec.radio.amateur.boatanchors Subject: Gonset power supply / modulator
diagram

Take the output of your 6V transformer... put it into a bridge rectifier
and then a series electrolytic.... Voila! Very ugly 120 Hz waveform.


Yes, I could try that way. If the rectified waveform contains harmonics of
100 Hz (not 120 in my case) it should not be a problem; on the other hand
also the the vibrator offers the transformer a waveform rich of harmonics.

Anyway I guess I would have to adjust the AC voltage so as to get the
specified DC output (about 515V). It will probably be somewhat higher than
just 6V.

73

Tony I0JX
Rome, Italy