RadioBanter - View Single Post

Jerry Stuckle · December 2nd 12, 05:37 AM posted to rec.radio.amateur.moderated

On 12/1/2012 9:45 PM, Bill Horne wrote:
On 11/30/2012 11:29 AM, wrote:

Released: 11/30/2012. WIRELESS TELECOMMUNICATIONS BUREAU, PUBLIC
SAFETY
AND HOMELAND SECURITY BUREAU, AND OFFICE OF ENGINEERING AND TECHNOLOGY
PROV
IDE REMINDER OF JANUARY 1, 2013 DEADLINE FOR TRANSITION TO NARROWBAND
OPERA
TIONS IN THE 150-174 MHZ AND 421-470 MHZ BANDS.

I'm going to ask the readers to re-educate an old FM tech a little bit.
As I understand it, the "new" bandwidths require +/- 2.5 KHz deviation,
which I /thought/ was called "sliver" band, but I haven't seen that term
used lately.

Here's another question: I think the majority of "current" commercial FM
transceivers are computer programmable, but I wonder if they are able to
change their transmit deviation and/or receiver bandwidth to the new
requirements under software control: if not, hams might be able to make
use of them for our public service efforts. A primer on the current
"state of the art" in programmable FM rigs would be nice.

Since the "new" spacing is 12.5 KHz, I assume that the "old" +/- 5 KHz
units will have to be replaced, especially if their software doesn't
allow the transmitters to be cut back to the more narrow deviation. If
that's the case, I wonder if any of the manufacturers will be willing to
cooperate in a program like the one we used to have for Teletype
machines, where hams could buy units that were being replaced, as long
as they agreed to keep them from being used in commercial service.

Come to think of it, are police/fire/municipal licensees subject to the
changes that other Part 90 users are going through? If they are, then
there might be an opportunity to transfer /their/ old gear into ARES or
RACES use.

Thoughts? Ideas?

TIA.

73,

Bill, W1AC

Bill,

That would be great if it could happen. I remember back in the late
60's and early 70's when we could get Motorola "G" and "A" strips and GE
Prog Lines cheap. This was before commercial 2 meter ham radios were
available. I converted a number of them from VHF High band to 2 meters.
Even though they were only one channel (a few had two channels), we
were tickled to get our hands on them.

--
==================
Remove the "x" from my email address
Jerry, AI0K

==================