Remember, each time the wire passes through the core is counted as a
turn. In other words, just passing the wire straight through the core
is one turn. 24 gauge wire should be fairly easy to get 40 turns in a
single pass. Toroids are usually wound about 330 degrees around (a 30
degree gap between start and end of winding)...

Scott


David Duxbury wrote:

Good day I am putting together a Vectronics 80 Meter Transceiver Kit
, the problem I have is winding the T50-2 toroid , the instructions
state to wind 40 turns of 24 gauge wire, would that be two passes of
twenty as forty on a single pass is nigh impossible. Help would be
appreciated.

--
Scott
http://corbenflyer.tripod.com/
Building RV-4
Gotta Fly or Gonna Die