300 ohm twinlead antenna.
"Wayne" wrote in message ...
"Wayne" wrote in message ...
"tom" wrote in message ...
On 6/6/2013 4:18 PM, Channel Jumper wrote:
Geoffrey S. Mendelson;805681 Wrote:
Take a length of 300 ohm twinlead. Short the far end, End feed one side
of
snip
# OOOOOPS.....I've got a big error in the model.
# Nevermind...I'll get back.
OK, after correcting the error in my EZNEC model parameters, the results
were too weird to have significance.
|