In rec.radio.amateur.antenna amdx wrote:
I have beads* on a coax and want to know the R and the L.
I have measured the R at 3.85MHz, It is 3,350 ohms.
I have also measured the phase shift, voltage leading
by 17ns. The period of 3.85Mhz is 260ns.

I want to calculate the impedance of the reactance.

Can anyone solve this for me?
I would like to see the math, because I want to measure again
at 7.5MHz.

My first step was to find the phase angle, 23.5*.
Do we agree there?

Thanks, Mikek


* it is actually a bit more than beads. Years ago, we were sent a box of
ferrite potcores, the cores arrived broken. I slide 42 broke halves onto
a piece of RG59, and now I'm measuring it.

The real resistance should not change with frequency so just measure it
with an ohmmeter.

Total impedance is the square root of the sum of the squares of resistance
and reactance.

The phase angle will tell you if the reactance is inductive or capacitive.


--
Jim Pennino