RadioBanter - View Single Post

amdx[_3_]

On 1/28/2014 4:02 PM, wrote:
In rec.radio.amateur.antenna amdx wrote:
On 1/28/2014 1:32 PM, wrote:
In rec.radio.amateur.antenna amdx wrote:
I have beads* on a coax and want to know the R and the L.
I have measured the R at 3.85MHz, It is 3,350 ohms.
I have also measured the phase shift, voltage leading
by 17ns. The period of 3.85Mhz is 260ns.

I want to calculate the impedance of the reactance.

Can anyone solve this for me?
I would like to see the math, because I want to measure again
at 7.5MHz.

My first step was to find the phase angle, 23.5*.
Do we agree there?

Thanks, Mikek

* it is actually a bit more than beads. Years ago, we were sent a box of
ferrite potcores, the cores arrived broken. I slide 42 broke halves onto
a piece of RG59, and now I'm measuring it.

The real resistance should not change with frequency so just measure it
with an ohmmeter.

I'm not sure, it might change with frequency, this is a ferrite around a
wire, so the ohm meter won't work. It's loss in the ferrites.

Correct, but if there is any significant loss in the ferrites at the
frequency of interest you probably shouldn't be using that ferrite.

Something like an AIM 4170 is very handy for measuring this and a whole
bunch of other things though a bit pricy.

Ok.