View Single Post
  #38   Report Post  
Old March 17th 14, 02:53 PM posted to uk.radio.amateur,rec.radio.amateur.equipment,rec.radio.amateur.misc
Jerry Stuckle Jerry Stuckle is offline
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default Quad shield coax & dielectric?

On 3/17/2014 10:45 AM, Rob wrote:
Jerry Stuckle wrote:
On 3/16/2014 11:42 AM, Ian Jackson wrote:
In message , Jerry Stuckle
writes





HDTV requires a stronger signal than the old NTSC.

It really depends on how good your old analogue NTSC was. For a
noiseless picture, you would need around 43dB CNR, but pictures were
still more-than-watch-able at 25dB, and the picture was often still
lockable at ridiculously low CNRs (when you certainly wouldn't bother
watching it). Digital signals can work at SNRs down to around 15dB for
64QAM and 20dB for 256QAM (although if it's a little below this, and you
will suddenly get nothing).



That has not been our experience. We had a number of customers here in
the DC area who had great pictures on NTSC sets, but got either heavy
pixilation or no picture at all when the switchover occurred. We sent
them to a company which does tv antenna installations (we do a lot of
low voltage, including tv - but not antennas). In every case,
installing a better outdoor antenna solved the problem.


Most likely the company reduced the transmitted power by a factor
of 10 at the time of the switchover, to put the added link margin
in their own pockets.
(transmitting a megawatt of ERP as was regular in the analog days
puts a serious dent in your electricity bill, even when you have
a lot of antenna gain)


Not at all. If anything, they raised their power.

--
==================
Remove the "x" from my email address
Jerry Stuckle

==================