Hello Mark ,,,

I have used the W3EDP antenna with my K-2. This use however has been
strictly in the field. I made mine from that old Christmas Tree lamp wire
so it was free. The short stub was placed at a minimal angle off of the
binding posts from the BNC connector. A tree is used as a terminus at about
a 35 foot elevation ....my accurate limit for an underhand rock toss.
Performance .... it works well given the simplicity. The EDP was also used
in a "bizarre" configuration by me where the end was several feet off the
ground and the rig was on a 3 story balcony. I casually worked about 25
countries on 20 and 15 between lying on the beach and drinking beer during
one week. The only difficulty I had was an inability to effectively tune 15
meters during one night in the woods. That was a little strange as the K-2
tuner is very effective. The antenna is sort of a relative to a Zepp from
what I have read.

Put it up and try a few configurations .... you might be surprised ....
Merry Christmas and the best for 04 Mark

73 KI3R Tom Popovic Belle Vernon Pa. nr Pittsburgh


"ZL3VML" wrote in message
...
Hi,
Does anyone use or have used the W3EDP longwire antenna?
Due to the location of my shack I can only use a longwire type antenna for
HF.
My tower holds numerous VHF / UHF antennas as I run the local BBS so an HF
beam is out of the question.
I would like to hear what your thoughts are on this antenna if you have
ever
used one.
73
Mark - ZL3VML