Thread
:
A short 160M antenna - folded elements
View Single Post
#
9
November 8th 14, 04:45 PM posted to rec.radio.amateur.antenna
[email protected]
external usenet poster
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
A short 160M antenna - folded elements
John S wrote:
On 11/7/2014 12:58 PM,
wrote:
wrote:
snip
The only downside to this antenna is that it is extremely narrow
banded, only about a kHz or so.
snip
I realized I should expand on that.
With all 5 inductors the same value the 5:1 bandwidth is about 500 Hz.
By staggering the values of the inductors in the four legs the bandwidth
can be improved by a little bit.
The best I could accomplish was about 1 Khz by making the leg values
.96, .98, 1.02, and 1.04 times the central leg value.
Going beyond a step factor of .02 made little difference in the bandwidth
and the resonant frequency SWR started to increase.
Okay, but the starting target was to be able to feed a short antenna
with good efficiency and I think you hit that target. I know you want to
keep it as practical as possible, but I am impressed with your results.
Thanks.
The whole point of the exercise was to show there are way to overcome
the generally low impedance of short antennas.
I did notice the resident gas bag has nothing to say about posts containing
numbers. It appears numbers are his kyptonite.
--
Jim Pennino
Reply With Quote
[email protected]
View Public Profile
Find all posts by
[email protected]