On 7/3/2015 1:06 PM, Wayne wrote:


As for EZNEC and transmission lines, I have never done that, but plan to
when I can. I don't follow how to do it.

Put a short piece of wire somewhere away from the antenna. Move your
source to this short piece of wire. Connect your transmission line
between the short wire and the antenna where you previously had the
source. Put the required line info into the transmission line box(es).
Start with a velocity factor of 1 and an attenuation of 0dB. You should
get the same results as before you moved your source. Then you can
adjust the Vf and loss based on the characteristics of the line that you
can find on line.

Cheers
John N1JLS