Thread: An antenna question--43 ft vertical
View Single Post
  #1   Report Post  
Old July 6th 15, 12:52 AM posted to rec.radio.amateur.antenna
John S John S is offline
external usenet poster
  
First recorded activity by RadioBanter: May 2011
Posts: 550
Default An antenna question--43 ft vertical
On 7/5/2015 5:24 PM, wrote:
Roger Hayter wrote:
wrote:


The output impedance of an amateur transmitter IS approximately 50 Ohms
as is trivially shown by reading the specifications for the transmitter
which was designed and manufactured to match a 50 Ohm load.

Do you think all those manuals are lies?

You are starting with a false premise which makes everything after that
false.


A quick google demonstrates dozens of specification sheets that say the
transmitter is designed for a 50 ohm load, and none that mention its
output impedance.

If the source impedance were other than 50 Ohms, the SWR with 50 Ohm
coax and a 50 Ohm antenna would be high. It is not.

Where is the source impedance found on a Smith chart? Also, if you have
EZNEC, you will not find a place to specify source impedance but it will
show the SWR.
Reply With QuoteReply With Quote